- Tel: 0086-571-63793989
- Fax: 0086-571-63733466
- E-mail: firstname.lastname@example.org
- Add: No.298 Yangqiao Village,Taihuyuan Town,Linan City, Zhejiang China
The led line light is an LED wall light. It is a soft L […]
The led line light is an LED wall light. It is a soft LED decorative light. The lights can be mounted in one or more combinations. It features low power consumption, long life, high brightness, flexibility, and maintenance-free.
Led line lights can be provided according to user needs. The products are available in 12V, 24V, 30cm, 60cm, 90cm and 120cm. In addition, it can be customized for customers.
The lamp shell is made of aluminum alloy, with clear lines, simple structure, beautiful appearance, strong corrosion resistance and convenient installation. The surface of the lamp is treated by electrostatic spraying, which is resistant to high temperatures and good weather. The reflector uses an imported anodized aluminum plate to ensure high output of light energy. 3mm thick high-strength tempered glass with high light transmittance and impact resistance. The built-in level of protection reaches IP65.
Pay attention to the following problems when using line lights:
1, the luminaire must be used at the specified voltage and frequency, and the ground lighting must be checked regularly.
2. Ordinary lamps should not be used on or near heaters such as electric, gas or kerosene stoves or directly in steam places.
3. Try not to repair the lamps in dangerous places such as gas and steam.
4. Indoor lighting fixtures cannot be moved outdoors. Lamps cannot be installed above a specified number of bulbs.
5. Replace the lamp, remove the cover and fuse, and the power must be cut off.
6. Regularly check the safety lamps to ensure that no abnormalities occur.
7, things like paper and cloth can't be placed near the illuminator or cover the illuminator.
8. Wipe the lamp with warm water. Do not scrub with gasoline or volatile oil.
9. The metal part of the lamp cannot be used freely. Dust on the back of the luminaire should be dry or clean.
10. When an abnormal situation occurs during the use of the luminaire, stop using it, cut off the power supply, and check.